Vibratory Dryer – Rubberized

Drying and polishing usually is done by crushed corn crop and give an immaculate and shiny surface.

The ”Vibra-Dry 200” corn crop dryer is to be filled with approx. 10-15% crushed corn crop.

The wet products can be loaded automatically and directly from a round vibration or Turbo-Line machine directly into the Vibra-Dry machine where the parts can run from one round or till the integrated pneumatic discharging flap is activated on the control cabinet (optionally directly onto a Vibra-Sep separating table.)

The temperature on a Vibra-Dry machine is automatically controlled by PT 100 sensors which electronically controls the heating elements. By doing it this way the temperature is never higher than the preset value. Thus, the power consumption significantly less than traditional corn crop dryers.

The Vibra-Dry is coated with a durable 2-Component PU-coating (Polyurethane) on the vertical sides.

The Vibra-Dry is automatically temperature controlled (PT 100 sensors) via the electronic heat regulator system. The corn is heated up by 6 pieces heating elements which indirectly (placed under the process bowl itself.) This contributes to an effective heat distribution without directly burning the corn crop off.

The heating is controlled by setting the temperature at a given temperature. Hereafter the electronic will regulate the heating effect as required. When a batch of products enters the Vibra-Dry machine the heating demands rises. This is registered and the heat output rises. When the parts and the corn has reached the preset temperature, the heating will sleeplessly be turned down. By controlling the Vibra-Dry this way the temperature will never be higher than the preset value/setting and thus the corn will never get burned.

Drying and polishing usually is done by crushed corn crop and give an immaculate and shiny surface.

The ”Vibra-Dry 200” corn crop dryer is to be filled with approx. 10-15% crushed corn crop.

By controlling the heating elements, the way the Vibra-Dry machine controls them this heating method is significant different than other corn dryer on the market and thus also has significantly cheaper operations costs.

Machine data Vibra-dry 200:                         

Motor effect: 1,5 kW.
Capacity L.:  200 L.
Capacity corn crop:  25 kg.
Speed: 1.500 rev./min.
Bowl-diameter (channel): 350 mm.
Internal bowl coating: PU coating on vertical sides
Heating elements:  Total 6,0 kW – 6 x 1,0 kW
Weight:  550 kg.
Electrical connection:  3×380 V, 16 Amp.
Air:  6 Bar.
Machine colour:  Ral: 7035 (light grey) w/ yellow PP-lid. (Can be delivered in other colours Vs. extra costs.)
Material:  Painted steel w/ perforated plates of PP
Measurements: L x B x H:  1.420 x 1.270 x 920-1.170 mm.
Loading height:   650-900 mm.
Unloading height:   750-1.000 mm.

Machine data Vibra-dry 600:            

Capacity: 600 L.
Capacity corn crop : 50 kg.
Speed: 1.500 rev/min.
Movement of exit box : 160 mm
Exit plate with holes for corn L x W : 900 x 380 mm
Machine height:   1.065 – 1.310 mm.
Inlet box W x H: 500 – 120 mm.
Exit box W x H:  290 x 150 mm.
Heat effekt:   6 x 1,5 kW Total 9,0 kW
Weight:   550 kg.
Air: 6 Bar
Color:  Ral: 7035 (lys grå) With Yellow PP-lid. (can be delivered in other colors vs. extra cost.)
Measurements L x W x H : 1,900 x 1,665 x 1,070 mm
Loading height:  850-1.000 mm.
Unloading height:  750-1.000 mm.

Das könnte dir auch gefallen …